New Holland BigBaler 1270 Plus
BigBaler 1270 Plus Specifications
Type | Standard | CropCutter™ |
Bale Dimensions | ||
Width / Height | 120 / 70 cm | |
Minimum / Maximum length |
100 / 260 cm | |
Tractor Requirements | ||
Minimum PTO Power | 122 hp(CV) | 150 hp(CV) |
PTO speed | 1000 rpm | |
Hydraulic remotes | 2 | 3 |
Main Drive | ||
Gearbox | Enclosed oil immersed triple reduction gearbox | |
Protection | Shear bolt, overrunning clutch and slip clutch | |
MaxiSweep™ pick-up | ||
Width (DIN11220) | 2.23 m | 2.35 m |
Roller windguard | As standard | |
Feed assist auger | As standard | |
Tine diameter | 5.5 mm | 6 mm |
Flotation | Adjustable Spring | |
Castering Pick-up Gauge Wheels | Optional | |
Pick up slipclutch protection | As standard | |
Gauge wheels (15 x 6.00-6-4ply) | 2 | |
Cropcutter™ system | - | As standard |
Knives options | - | 15 or 29 |
Knife distance | - | 78 / 39 mm |
Knife removal | - | Sliding knife drawer |
Knife activation, in - out | - | Hydraulic |
Knife protection | - | Individual springs |
Feeding system | ||
Feeder | 3 packer forks, 9 single tines |
Rotor Width 1200 mm "W" tine configuration |
Feeder protection | Slip clutch | Cut-out clutch |
Stuffer | Fork type with 6 tines |
Fork type with 6 times |
Stuffer protection | Shearbolt | |
Pre-compression chamber, volume | 0.3 m³ | |
SmartFill™ system | As standard | |
Plunger | ||
Speed | 48 strokes/min | |
Length of stroke | 710 mm | |
Tying system | ||
Type | Double knot type | |
Twine type | 110-150 M/kg plast. | |
Number of twines | 6 | |
Knotter fan type | Electric | |
Number of knotter fans | 3 | |
Knotter function alert | IntelliView™ monitor and visual | |
Knotter lubrication | Grease | |
Twine ball capacity | 32 | |
Bale density system | ||
Promotional 3-way control | IntelliView monitor controlled | |
Electronic control system | ||
ISO 11783 Connection Ready | As standard | |
IntelliView™ IV monitor | Optional | |
IntelliCruise™ system | Optional* | |
PLM® GPS data logging | Optional | |
Lights | ||
Road lights | As standard | |
Light package I | Work lights standard: 2 x rear work lights, 1 x rotary beacon, LED strip lights on the knotter, pick-up and needles |
|
Light package II | Service LED lights optional: left and right and side stuffer lights, left and right hand side twine box lights |
|
Axles | ||
Single axle | 600/55X22.5 or 710/40X22.5 | |
Tandem axle | 500/50X17 | |
Tandem axle with Auto-Steer system |
500/50X17 |
|
Large wheel tandem axle with Auto-Steer system | 560/45 R22.5 or 620/50 R22.5** | |
Brakes | ||
Hydraulic | Optional | |
Pneumatic | Optional | |
Maximum travelling speeds | ||
Single & Tandem axle / Large wheel tandem axle | 40 / 60 kph | |
Baler dimensions | ||
Length chute closed (single piece) | 8259 mm | 8315 mm |
Width (Single axle 600/55X22.5 tyres) | 2948 mm | 2948 mm |
Width (Single axle 710/40 R22.5 tyres) | 2984 mm | 2984 mm |
Width (Tandem axle 500/50X17 tyres) | 2782 mm | 2782 mm |
Width (Large wheel tandem axle 620/50 R22.5 tyres) | 2946 mm | 2946 mm |
Height (Single axle and Tandem axle) | 3133 mm | 3223 mm |
Standard equipment | Roller windguard, SmartFill™ system, central greasing system, standard Bale-Eject system, roller bale chute with hydraulic folding, working lights | |
Optional equipment | Comfort package, automatic greasing, Partial Bale-Eject™ system, service lights, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, Electronic Bale Length system, CropSaver liquid preservative, rear bumper |
* Charge Control mode only available on CropCutter™ models
** 620/50R22.5 for CropCutter™ models only